PI SLIDING GATES

WIŚNIOWSKI industrial sliding gates - smooth and efficient operation

PROVEN TECHNOLOGY AND SIMPLE ASSEMBLY

FUNCTIONALITY AND SAFETY

Ostre zakonczenie — **Anti-climb spikes** in the form of a steel comb that may be mounted on the top edge of a gate leaf.

Element regulacji — **Tensioning device** allows additional levelling to the ground when assembling the gate and correcting the gate position in normal operation.

Zamek do bramy recznej — **Lock to a manually-operated gate** is a solid and durable security device for a manuallyoperated gate, located in the aluminium housing.

Fotokomorki — **Photocells** mounted on the gate posts: if an obstacle appears within the gate opening an infrared beam will break and so the gate stops and reverses.

Bezpieczne sterowanie bramy — **Safe gate control** with a key switch equipped with a safety cut-out switch: turning the key starts opening or closing the gate, while pressing the safety switch stops the gate movement immediately.

Naped umieszczony w slupie — **Drive located in the post** secured against mechanical impact, adverse weather conditions and unauthorised access.

Listwa bezpieczenstwa — **Safety edge** makes the gate stop and reverse on contact with an obstacle. Mounted on the gate-leaf front, on a guiding frame or at the gate end.

System indukcyjny — **Induction system** when the safety bar is pressed, an impulse is sent from the gate leaf to the controller.

Listwy bezpieczenstwa i lampa ostrzegawcza — **Safety edges and warning light** located on the post. Safety bars react to pressure, while the light signals the gate leaf movement each time the gate is activated.

SLIDING GATE PI 200 – manually operated, power operated with a drive unit in a low or high box

brama przesuwna PI 200 reczna brama przesuwna PI 200 automatczyna niski slupek brama przesuwna PI 200 z napedem

Cantilever sliding gate PI 200 is designed to close a driveway up to 16m wide. Two cantiliver gates (2 x 12 m) allow to close as wide as 24 m driveway.

Main features:

200 x 155 mm ground track,
triple guiding frame in a manually-operated gate,
double receiver post,
balancing back frame to prevent the gate from tilting when fully opened,
power-operated gate with a drive located in the post,
available external drive execution.

SLIDING GATE PI 130 – manually operated, power operated with a drive unit in a low or high box

brama przesuwna PI 130 reczna brama przesuwna PI 130 automatczyna niski slupek

Cantilever sliding gate PI 130 is designed to close a driveway up to 9 m wide. Two cantiliver gates (2 x 8m) allow to close as wide as 16 m driveway.

Main features:

130 x 115 mm ground track,
double guiding frame,
double receiver post,
balancing back frame to prevent the gate from tilting when fully opened (depending on the gate width),
power-operated gate with a drive located in the post, closed with a cover,
available external drive or short-post drive executions.

SLIDING GATE PI 95 – manually operated and power operated

brama przesuwna PI 95 reczna brama przesuwna PI 95 z napedem

Cantilever sliding gate PI 95 is designed to close a driveway up to 7 m wide. Two cantiliver gates (2 x 6 m) allow to close as wide as 12 m driveway.

Main features:

95 x 85mm ground track,
double guiding frame in a manually-operated gate,
single receiver post,
balancing back frame to prevent the gate from tilting when fully opened (depending on the gate width),
power-operated gate with the drive located in the post, closed with a cover,
available external drive execution.

GATES DESIGNS

wypelnienie PI 200 25x25

PI sliding gate with an infill made of 25x25 [mm] box sections welded to the structure

wypelnienie PI 200 VEGA B

PI sliding gate with the VEGA B mesh panel infill screwed to the structure

wypelnienie PI 200 vega 2d

PI sliding gate with the VEGA 2D Super mesh panel infill screwed to the structure

wypelnienie wspawane PI 200 vega 2d super

PI sliding gate with the VEGA 2D Super mesh panel infill welded to the structure

wypelnienie PI 200 fi25

PI sliding gate with an infill made of round tube sections ø 25 [mm] welded to the structure

wypelnienie PI 200 25x25 Caro

PI sliding gate with an infill made of 25x25 [mm] Caro box sections welded to the structure

wypelnienie PI 200 30x18

PI sliding gate with an infill made of 30x18 [mm] box sections welded to the structure

wypelnienie PI 200 AW10228

PI sliding gate with an infill made of 1 [mm] thick and 230 [mm] high sheet with 20 [mm] spacing between the panels.
MODERN AW.10.228 residential infill model

wypelnienie PI 200 AW10229

PI sliding gate with a horizontal (shutter) infill made of formed sheet 0.75 [mm] thick.
MODERN AW.10.229 residential infill model

CORROSION PROTECTION

LONGEVITY

All WIŚNIOWSKI fencing system elements are rust-protected with top anticorrosive coating achieved by galvanising and powder painting. It is hot dip galvanising of a chemically cleaned construction that provides dozens of years of rust protection to WIŚNIOWSKI fencing system elements.

EFFICIENT PROTECTION

Galvanising is an efficient economically technique in terms of both production and maintenance. Galvanised fencing by WIŚNIOWSKI does not require surface maintenance for years. Rust-proofing no longer means expensive treatments as with traditional fencing. Galvanised steel may be recycled so it does not litter or burden the environment.

DUPLEX SYSTEM – DOUBLE PROTECTION

Combined galvanised and varnish coatings in the DUPLEX system make WIŚNIOWSKI fencing serve considerably longer. In all weather conditions WIŚNIOWSKI fencing will look attractive. RAL colour palette application makes a selection of polyester coating colour easy.

PROOFED IN EVERY CONDITIONS

Galvanising by WIŚNIOWSKI complies with the European norm PN-EN ISO 1461 which guarantees proper quality of galvanised products. Galvanised coating is resistant to both high and low temperatures and UV radiation for best protection of steel surfaces.